大变形有限元法分析边坡稳定性     

杨涛  周德培  苏金蓉 《山地学报》2006,24(1):101-104

边坡稳定性分析的重要任务是确定边坡潜在滑面的位置及相应的安全系数,鉴于坡体位移可在现场监测中直接得到,提出边坡潜在滑面确定的位移判据,采用大变形有限元首先计算出边坡的位移场,然后在开挖面的不同高度作塑性区内的水平位移参考线,依次连接参考线上的位移突变点即得到边坡失稳的潜在滑面位置,分析滑面上的应力以及岩体抗剪强度即得到边坡的整体安全系数。  相似文献   

Effect of sampling and linkage on fault length and length–displacement relationship     

S-S. Xu  A. F. Nieto-Samaniego  S. A. Alaniz-Álvarez  L. G. Velasquillo-Martínez 《International Journal of Earth Sciences》2006,95(5):841-853

The power-law exponent (n) in the equation: D=cL ⁿ , with D = maximum displacement and L = fault length, would be affected by deviations of fault trace length. (1) Assuming n=1, numerical simulations on the effect of sampling and linkage on fault length and length–displacement relationship are done in this paper. The results show that: (a) uniform relative deviations, which means all faults within a dataset have the same relative deviation, do not affect the value of n; (b) deviations of the fault length due to unresolved fault tip decrease the values of n and the deviations of n increase with the increasing length deviations; (c) fault linkage and observed dimensions either increase or decrease the value of n depending on the distribution of deviations within a dataset; (d) mixed deviations of the fault lengths are either negative or positive and cause the values of n to either decrease or increase; (e) a dataset combined from two or more datasets with different values of c and orders of magnitude also cause the values of n to deviate. (2) Data including 19 datasets and spanning more than eight orders of fault length magnitudes (10⁻²–10⁵ m) collected from the published literature indicate that the values of n range from 0.55 to 1.5, the average value being 1.0813, and the peak value of n _d (double regression) is 1.0–1.1. Based on above results from the simulations and published data, we propose that the relationship between the maximum displacement and fault length in a single tectonic environment with uniform mechanical properties is linear, and the value of n deviated from 1 is mainly caused by the sampling and linkage effects.  相似文献   

层状介质高频电磁场响应及位移电流影响     

郑圣谈  曾昭发  王者江 《吉林大学学报(地球科学版)》2006,(Z1)

所讨论的电磁场频率介于传统的低频电磁法和雷达频率之间。在这个频率范围内,传导电流和位移电流都是不可忽略的。采用高密度采样算法计算水平层状磁偶线圈模型的电磁响应,通过对归一化的电磁响应在不同地电情况的模拟,比较分析了高频电磁场响应特征以及位移电流对高频电磁响应的贡献。  相似文献   

基于GM(1,1)优化模型的岩石边坡变形预报     

巫德斌  徐卫亚 《地质灾害与环境保护》2002,13(4):60-63

岩石边坡系统是一典型灰色系统，其变形发展过程可以用灰色预测模型完成。尽管传统GM（1，1）模型预测有很多成功的实例，但是也存在一些预测偏差过大的情况，必须对其进行优化。逐步迭代法GM（1，1）模型不仅收敛速度快，而且与原始数据库序列的凹凸性保护一致。利用自编的计算程序对马步坎边坡预测测点G1沉降和开裂进行预测分析，结果表明逐步迭代法GM（1，1）优化模型计算精度较传统GM（1，1）模型和背景构造法GM（1，1）优化模型高，较好地反映了岩石边坡的变形趋势。  相似文献   

Behaviour of a rupture of the 21 June 2000 earthquake in South Iceland as revealed in an asphalted car park     

Jacques Angelier  Franoise Bergerat 《Journal of Structural Geology》2002,24(12)

A major earthquake (M=6.6) occurred on 21 June 2000, in South Iceland. This paper presents an unusual example of left-lateral strike-slip displacement recorded in a newly asphalted car park surface through a mechanically consistent pattern of open fissures and pressure ridges resulting from simple shear and rotation. Measurement of these features allows accurate reconstruction of the local deformation. The behaviour of the asphalt layer resembles that of analogue physical models, especially in terms of rotations induced by shear deformation. It is finally shown that through a wide range of scales some basic patterns associating rotation and opposite senses of strike-slip exist in the South Iceland Seismic Zone.  相似文献   

Numerical Analysis of Space–Time Finite Element Formulations for Miscible Displacements     

Rigoberto G. Sanabria Castro  Sandra M. C. Malta  Abimael F. D. Loula  Luiz Landau 《Computational Geosciences》2002,5(4):301-330

A finite element formulation is proposed to approximate a nonlinear system of partial differential equations, composed by an elliptic subsystem for the pressure–velocity and a transport equation (convection–diffusion) for the concentration, which models the incompressible miscible displacement of one fluid by another in a rigid porous media. The pressure is approximated by the classical Galerkin method and the velocity is calculated by a post-processing technique. Then, the concentration is obtained by a Galerkin/least-squares space–time (GLS/ST) finite element method. A numerical analysis is developed for the concentration approximation. Then, stability, convergence and numerical results are presented confirming the a priori error estimates.  相似文献   

桥梁限位器抗震设计方法研究   总被引：4，自引：0，他引：4  

戴福洪  翟桐 《地震工程与工程振动》2002,22(2):73-79

本文建立了两跨简支梁桥和五跨多跨刚架桥两结构模型，针对限位器的种类、刚度、强度、安装位置，输入地震动等进行了大量工况下的数值模拟研究。研究表明限位器与柱（框架）的刚度比在0.5-2之间较优。将现有的限位器设计方法应用于两算例结构，对现有限位器设计方法进行了比较研究。  相似文献   

依据剖面资料求解断层的水平位移     

安晓文  李世成  周瑞琦  俞维贤  陈宇军 《地震研究》2002,25(4):369-373

提出依据开挖剖面中的楔形体在受到断层作用时其厚度的变化量求解断层水平位移的方法。分析表明断层水平位移量S与楔形体在断层两侧厚度变化量Δh满足关系式S＝Δh/ρsinβ。式中ρ为楔形体在断层走向上的尖灭系数，β为断层的倾角，该关系式不仅能满足纯走滑运动的断层，而且也满足一般斜滑断层，同时提出了在剖面上判断断层水平运动性质的方法。  相似文献   

Extracting coseismic deformation of the 1997 Mani earthquake with differential interferometric SAR   总被引：2，自引：0，他引：2  

单新建  马瑾  王长林  柳稼航 《地震学报(英文版)》2002,15(4):431-438

Introduction The development and application of Interferometric Synthetic Aperture Radar (InSAR) have a close relationship with the sensors development of Synthetic Aperture Radar (SAR). The conception of SAR is proposed comparatively to the real aperture radar antenna. It is well known that the longer the antenna is, the higher the observation resolution will be. Just limited by the length of the antenna, the resolution of real aperture radar is generally very low and cannot meet the r…  相似文献   

Recent developments in seismically isolated buildings in Japan     

Shin Okamoto  Nagahide Kani  Masahiko Higashino  Norihide Koshika  Masayuki Kimizuka  Mitsumasa Midorikawa  Masanori Iiba 《地震工程与工程振动(英文版)》2002,1(2):213-225

The Building Standard Law of Japan and related Enforcement Order and Notifications have been substantially revised since the year 2000 to introduce a performance-based regulatory and deregulation system for building control systems. Up to then, time-history analyses were mandatory for isolated buildings and had to be specially approved by the Minster of the Ministry of Construction (MOC). Simplified design procedures based on the equivalent linear method for seismically isolated buildings have been issued as “Notification 2009 — Structural calculation procedure for buildings with seismic isolation” from MOC, and are now integrated into the Ministry of Land, Infrastructure, and Transportation (MLIT). Along with Notification 2009, “Notification 1446 of year 2000 — Standard for specifications and test methods for seismic isolation devices” was also issued. Buildings with heights equal to or less than 60m and that are designed according to these Notifications, including base isolated buildings, only need approval from local building officials, and no longer require the special approval of the Minister of MLIT. This paper summarizes: 1) some statistics related to buildings with seismic isolation completed up to the end of 2001; 2) simplified design procedures required by Notification 2009 of year 2000; and 3) performance of seismic isolation devices required by Notification 1446 of year 2000.  相似文献